Wuxi Zhongborui Machinery Co. Ltd.
Wuxi Zhongborui Machinery Co. Ltd.
Add to Cart
Automatic C Purlin Roll Forming Equipment 3 Phase 15 Meters Per Minute
| SPECIFICATIONS FOR 80-300 Automatic C Purlin Quick Change Size Roll Forming Machine | |||
| DECOILER | Manual type | no power,5Ton*500mm | coil inner–diameter=508mm； Load capacity= MAX.5.0Ton, Coiler Width= 500mm |
| Hydraulic type | 5Ton*600mm | Load capacity= MAX.5Ton; Hydraulic system expand coil inner hole, Pump motor: 3KW;Coil inner–diameter=470-510mm; Coil Width= MAX.600mm; Drag-off rotation type | |
| | | | |
| Main performance parameters of MAIN ROLL FORMING MILL | Main motor capacity | kw/h | 18.5 |
| Forming station | with extra 5rollers (upper 3 and 2 down))for pre-leveling | 16 | |
| Forming speed(not incl.punching&cutting) | meter per minute | about 15-18 | |
| Hydraulic Punching and Cutting system | Hydraulic system | MPa | 16(max.) |
| Hydraulic drive | kw/h | 7.5 | |
| Cutting tool material | Tool steel | Cr12 | |
Advantages of our C Z purlin roll forming machine
Machine's components:
Uncoiler, coil sheet flattening equipment, hole punching department, C/Z shap main forming system, cutting deparment, hydraulic station, PLC control table, final product run out table.
Main technical parameter:
- Suitable raw meterial: Cold rolled strip or heat-treated galvanized steel strip
- Suitable thickness: 1.5-3.0mm
- Forming speed: About 10-12m/min
- Main motor power: 15kw; Hydraulic power: 5.5kw(depend on final design)
- Voltage: 380V, 3 phase, 60HZ or at buyer's requirment
- PLC control and transfered by chain
- Machine's dimension: About 18m*1.8m*1.6m
Meterial of main department:
- Forming roller: Cr15 bearing steel with quenched treatment
- Cutting blade: Cr12 mould steel with quenched treatment
Working flow:
Uncoil the strip-guiding and flattening the sheet-hole punching-main roll forming-cutting-final products run out to table
