The highway guardrail roll forming machine can be designed as two or three wave profiles in one machine, you just need to add some stations at the end of the machine.

The products of the guardrail roll forming machine are used as guardrails for the both sides of the highway.

Machine Configuration:

Decoiler, Feeding&Leveling Applicator, Punching, Roll Formin Unit, Computer Control System, Hydraulic Cutting, Output Table

Working Flow:

Decoiler—Feeding&Leveling Applicator—Punching—Roll Forming Unit—Computer Control System—Hydraulic Cutting—Output Table

Main Components

Decoiler -------------------------------------------------- 1 Unit

Feeding guide ------------------------------------------ 1 Unit

Main roll forming machine --------------------------- 1 Unit

Hydraulic cutting device ------------------------------ 1 Unit

Hydraulic Station --------------------------------------- 1 Unit

PLC computer control -------------------------------- 1 Unit

Output table ---------------------------------------------- 1 Unit

Technical parameter:

1 De-coiler

1) The un-coiler with bipyramid and tension power,

2 Loading 8T. Inner diameter of coil: φ 508mm,

3) Maximum diameter of coil: φ 2000mm,

4) Power of tension power: 2.2kw,

2, Flatting machine

1) The wall plate type seven roller flatter, two rollers clamp deliver, five rollers for leveling.

2) Power: 7.5kw,

3, Punching machine

1) Using type Yl32-315 4 pillar hydraulic pressure puching machine,

2) Hydraulic pressure power: 22kw.

3) Material of blade mould & plunger chip is alloy steel Cr12MOV.

4, Fast feeding

1 Initiative delivers.

2 The power disposition is the 2.2KW.

3 The reductor is ZQ250.

5, Opto-electrical Cutting device

6, Forming machine:

1) Forming racks: 12sets

2) Cast iron torri type

3) Width of machine: 550mm

4) Material of torri is HT200, tempering

5) Double axis transmission gear box 1set, under the axis transmission gear box 10set, bevel gear modulus M=9, material of gear box is only HT200.

6) Power of main machine: 55kw, transducer speed governor. ZQ650, reductor, speed ratio: 48.57, Between the transmission gear box uses 1 inch double chain drive; Connects with the rotary drive shaft between rollers, rotary drive shaft model 140-275; Uses 1.5 inch double chain drives with the speed reducer;

7, Collection table

8, Control system

Production line uses PLC controller, opto-electrical device control cutting. But manual and automatic control whole production line for each part coordination.

9, Forming mould:

Material is GCr15. Whole quenching hardness is HRC55 º ~60

Equipment struction introduction

This production line may produce the cable tray, the different sizes through the replacement of punching moulds to complete. Forming machine is combined and adjustable, one set of combined rollers complete all cable tray products, the change size through adjust distance of rollers to complete.

Product Tags:

Safety Crash Barrier Highway Guardrail Roll Forming Machine 8T Loading

Metal Roll Forming Machines

Silo Forming Machine

Cold Roll Forming Machine

Roll Forming Equipment

Glazed Tile Roll Forming Machine

Roof Panel Roll Forming Machine

Door Frame Roll Forming Machine

Double Layer Roll Forming Machine

Downspout Roll Forming Machine

Guardrail Roll Forming Machine

Purlin Roll Forming Machine

Roof Making Machine

Safety Crash Barrier Highway Guardrail Roll Forming Machine 8T Loading

Technical parameter:

highway guardrail roll forming machine

highway guardrail forming machine

guardrail roll forming machine